Brother DCP-375CW - Manual (Page 98)

86
3.Network
(Continued)
2.WLAN
(Continued)
1.TCP/IP
(Continued)
8.DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP
address of the
primary or
secondary
server.
9.APIPA On*
Off
Automatically
allocates the IP
address from the
link-local address
range.
2.Setup Wizard — — You can
configure your
print server.
3.SES/WPS/AOSS — — You can easily
configure your
wireless network
settings using the
one-button push
method.
4.WPS w/PIN
Code — — You can easily
configure your
wireless network
settings using
WPS with a PIN
code.
5.WLAN Status 1.Status — You can see the
current wireless
network status.
2.Signal — You can see the
current wireless
network signal
strength.
3.SSID — You can see the
current SSID.
4.Comm. Mode — You can see the
current
Communication
Mode.
6.MAC Address — — You can see your
machine's MAC
address from the
control panel.
3.Network I/F — Wired LAN*
WLAN
— You can choose
the network
connection type.
Level1 Level2 Level3 Level4 Options Descriptions
See Network User's Guide on the CD
-
ROM.
The factory settings are shown in Bold with an asterisk.