Brother MFC J6510DW - Manual (Page 75)

Troubleshooting
70
10
The Brother machine cannot print or scan over the network.
The Brother machine is not found on the network even after successful installation.
Question Interface Solution
Are you using security
software? wired/
wireless See I'm using security software. on page 72.
Is your Brother machine
assigned with an available
IP address? wired/
wireless  Confirming the IP address and the Subnet Mask
Verify that both the IP addresses and Subnet Masks of your computer
and the Brother machine are correct and located on the same network.
For more information on how to verify the IP address and the Subnet
Mask, ask the network administrator or visit the Brother Solutions Center
at http://solutions.brother.com/.
 (Windows
®
)
Confirming the IP address and the Subnet Mask using the Network
Connection Repair Tool.
Use the Network Connection Repair Tool to fix the Brother machine's
network settings. It will assign the correct IP address and Subnet Mask.
To use the Network Connection Repair Tool follow the steps below:
Note
• (Windows ® 2000/XP/Windows Vista ® /Windows ® 7) Login to the network
with Administrator privileges.
• Make sure that the Brother machine is turned on and is network-
connected to your computer.