Brother HL-8050N User Manual
Page 79
NOVELL NETWARE PRINTING 6 - 20
The following steps apply to configuring a remote printer on
NetWare 3.xx systems:
6
a
Select print server Information from the PCONSOLE main
menu and choose the name of the PSERVER NLM.
b
Select print server configuration and then printer
configuration. Select any Not Installed printer and press
Enter. Remember the number of this printer, since it will be
used later in the configuration process.
c
If desired, type in a new name for the printer.
d
Go to Type, press ENTER, highlight Remote Other/
Unknown and press ENTER again. The other settings in this
menu are not required.
e
Push ESCAPE and save the changes.
f
Push ESCAPE and select Queues Serviced by Printer.
g
Highlight the printer name that you just configured and press
ENTER.
h
Press INSERT, choose the desired print queue, and press
ENTER (you can accept the default priority).
i
Press ESCAPE several times to exit PCONSOLE.
Assigning the Remote printer name and number using
BRCONFIG
7
a
Execute the BRCONFIG from the Windows
®
menu.