Brother DCP-8155DN - Manual (Page 12)

12
Macintosh
USB
For USB Interface Users
(Mac OS X 10.5.8 - 10.7.x)
11
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
b
Connect the USB cable to the USB port
marked with the symbol on your machine
and then connect the cable to your Macintosh.
c
Make sure your machine's power switch is on.
12
Install MFL-Pro Suite
a
Put the installer CD-ROM into your CD-ROM
drive.
b
Double-click the Start Here OSX icon. If
prompted, select your model and then follow
the on-screen instructions.
c
Choose your machine from the list, and then
click OK.
d
When this screen appears, click Next.
Important
For users of Mac OS X 10.5.7 or lower, upgrade
to Mac OS X 10.5.8 - 10.7.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/.)
Note
If you want to add the PS driver (BR-Script3
printer driver), please go to the Brother Solutions
Center at http://solutions.brother.com/ and visit
FAQ's on your model page for instructions.
Important
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
The installation of MFL-Pro Suite is now
complete.
Go to step
13 on page 13.