Brother ADS-1000W - Manual (Page 26)

Configuring Your Machine for a Wireless Network
23
3
1 (Windows Vista
®
)
Click (Start) > Network > Add a wireless device.
(Windows
®
7)
Click (Start) > Devices and Printers > Add a device.
(Windows
®
8)
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click
Settings > Control Panel > Hardware and Sound > Devices and Printers > Add a device.
2 Choose the machine and click Next.
3 Enter the PIN displayed on the LCD in step f and then click Next.
4 Choose the network that you want to connect to, and then click Next.
5 Click Close.
i If your wireless device is connected successfully, the LCD displays Connected.
If the connection failed, the LCD shows an error code. Make a note of the error code, refer to
Troubleshooting in the Quick Setup Guide, and correct the error.
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, choose Install MFL-Pro Suite from the
DVD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, choose Start Here OSX from the DVD-ROM
menu.