Brother MFC-J410W - Manual (Page 22)

Chapter 1
8
LCD screen
1
The LCD shows the current machine status
when the machine is idle.
1 Wireless Status (MFC-J265W and
MFC-J410W only)
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
2 Current Receive Mode
Lets you see the current receive mode.
 Fax (Fax only)
 F/T (Fax/Tel)
 TAD (External TAD)
 Mnl (Manual)
3 Memory Status
Lets you see the available memory in the
machine.
4 Ink indicator
Lets you see the available ink volume.
The warning icon appears when there is
an error or a maintenance message. For
details, see Error and Maintenance
messages on page 54.
Basic Operations
1
The following steps show how to change a
setting in the machine. In this example the
Mode Timer setting is changed from
2 minutes to 30 seconds.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Mode Timer.
Press OK.
d
Press a or b to choose 30Secs.
Press OK.
You can see the current setting on the
LCD:
e
Press Stop/Exit.
0 Max
Fax Mem.
01:4 1:41 01:41
01. 01. 2010 01. 01. 2010 01. 01. 2010
1
2 3 4
Fax
General Setup
MENU Sel.&Press
Ink
OK
General Setup
Mode Timer
Paper Type
Paper Size
2Mins
Mode Timer
30secs
1Min
Off
0Sec
Mode Timer
Paper Type
Paper Size
30Secs
General Setup