Brother HL-4070CDW - Manual (Page 63)

For Network Users
61
3
Web Based Management
(web browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
• The User Name is ‘admin’ and the default
password is ‘access’. You can use a web browser
to change this password.
• We recommend Microsoft Internet Explorer 6.0
®
(or higher) or Firefox
®
1.0 (or higher) for
Windows
®
and Safari™ 1.0 for Macintosh
®
.
Please also make sure that JavaScript and Cookie
are always enabled in whichever browser you use.
We recommend you upgrade to Safari™ 1.2 or
higher to enable JavaScript. To use a web
browser, you will need to know the IP address of
the print server.
1
Type http://printer_ip_address/ into
your browser.
(Where printer_ip_address is the IP
address or the print server name)
For example: http://192.168.1.2/
(if the printer’s IP address is 192.168.1.2.)
See Chapter 2 of the Network User's Guide.
4
Network default settings
To restore all network settings of the internal print
server to default, follow the steps below.
1
Press the + or – button to choose LAN.
Press OK.
Select ab or OK
LAN
2
Press the + or – button to choose
Factory Reset.
Press OK.
LAN
Factory Reset
3
Press OK again.
Factory Reset
OK?
5
Print the Printer Settings
Page
The Printer Settings Page lists all the current printer
settings, including network settings. To print the
printer settings page:
1
Press the + or – button to choose
Machine Info..
Press OK.
Select ab or OK
Machine Info.
2
Press OK again.
Machine Info.
Print Settings
3
Press OK again to print the Printer Settings
Page.