Brother DCP-8110DN - Manual (Page 33)

23
3
3
How to load
documents
3
You can copy and scan from the ADF
(automatic document feeder) or the scanner
glass.
Using the automatic
document feeder (ADF)
3
The ADF can hold up to 35 pages (for
DCP-8110DN) or up to 50 pages (for
DCP-8150DN and DCP-8155DN) and feeds
each sheet individually. Use standard
20 lb (80 g/m
2
) paper and always fan the
pages before putting them in the ADF.
Document Sizes Supported
3
How to load documents
3
Important
• DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
• To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
Note
• To scan documents that are not suitable
for the ADF, see Using the scanner glass
uu
page 24.
• It is easier to use the ADF if you are
loading a multiple page document.
• Make sure documents with correction fluid
or written with ink are completely dry.
a
Unfold the ADF document support (1).
Lift up and unfold the ADF document
output support flap (2).
b
Fan the pages well.
c
Stagger the pages of your document
face up top edge first, in the ADF until
the LCD display message changes and
you feel the top page touch the feed
rollers.
Loading documents
3
Length: 5.8 to 14 in. (147.3 to 355.6 mm)
Width: 5.8 to 8.5 in. (147.3 to 215.9 mm)
Weight:
17 to 24 lb (64 to 90 g/m
2
)
1 2