Brother DCP-8110DN - Manual (Page 66)

56
Out of Memory
The machine’s memory is full. Copy operation in process
Do one of the following:
 Press Start to copy the scanned pages.
 Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
 Add optional memory.
(See Advanced User's Guide: Memory
board.)
Print operation in process
Do one of the following:
 Reduce the print resolution.
(See Software User's Guide: Printing (for
Windows
®
) or Printing and Faxing (for
Macintosh).)
 Add optional memory.
(See Advanced User's Guide: Memory
board.)
Out of Memory
Secure Print Data
is full.
The machine’s memory is full. Press Stop/Exit and delete the previously
stored secure print data.
(See Software User's Guide: Secure Print
Key.)
Print Unable XX
The machine has a mechanical
problem. Do one of the following:
 Turn the power switch off, wait a few
minutes, and then turn it on again.
 If the problem continues, call Brother
Customer Service.
Protected Device
The protect switch of the USB
Flash memory drive is on. Turn off the protect switch of the USB Flash
memory drive.
Rename the File
There is already a file on the
USB Flash memory drive with
the same name as the file you
are trying to save. Change the file name of the file on the USB
Flash memory drive or the file you are trying to
save.
Replace Parts
Drum
It is time to replace the drum
unit. Replace the drum unit.
(See Replacing the drum unit uu page 48.)
The drum unit counter was not
reset when a new drum was
installed. Reset the drum unit counter.
(See Resetting the drum counter uu page 51.)
Error Message Cause Action