Brother HL-1870N - Manual (Page 2)

OFF ON
O I
OFF ON
O I
Enter your unique port name (ex.
BLP1), and then click the OK button. Select "LPR (Recommended),"
and then click the Next button.
Step 5 Connect the Printer to Your Network
& Install the Driver
Step 6 Configuring the NetBIOS Port Step 6 Select the Appropriate Printer Queue or
'Sharename'
Step 6 Configuring the LPR Port
For Windows ® 95/98/Me Users Only
For Windows NT ® 4.0 Users Only
For Windows ® 2000 Users Only
For Windows ® XP Users Only
Specify your printer's IP Address (or click the Browse button
to see a list of printers), and then click the OK button. Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete.
Enter your unique port name (ex. BNT1),
and then click the OK button. Enter the path name (or click the Browse... button to
see a list of printers), and then click the OK button. Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete. Select "NetBIOS," and then click
the Next button.
For Brother Peer-to-Peer Network Printer Users (LPR - Recommended Peer-to-Peer Printing Method )
For Brother Peer-to-Peer Network Printer Users (NetBIOS)
Steps 1 to 4 Follow these steps in the Quick Setup
Guide first.
For All Network Users
For Network Shared Printer Users
Select your printer's queue, and then click the
OK button. When the appropriate queue is specified, the printer driver
will be installed.
The setup is now complete.
* 1 Follow the instructions for the appropriate network connection style and your operating system.
Click the Next button. Enter your printer's IP Address and your unique port
name, and then click the Next button.
After your PC has restarted, click
Start, Settings and Printers.
The setup is now
complete.
Select the Brother HL-1850 or Brother HL-1870N icon.
From the File menu, select Properties to open the driver properties. Click the Configure Port...
button in the Ports tab. Select "LPR" on protocol, and then click the OK button.
Close the driver properties.
Select "LPR (Recommended)," and then
click the Next button. Click the Finish button, and then click the OK button.
Click the Finish button again to restart your PC.
Click the Next button. Enter your printer's IP Address and
your unique port name, and then click
the Next button. Select "LPR
(Recommended)," and
then click the Next button. Click the Finish button. Click the OK button.
Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete.
Click the Finish button to restart your PC.
After your PC has restarted, setup will be complete. Enter your printer's IP Address and the queue
name BINARY_P1, and then click the OK button. Select "LPR (Recommended),"
and then click the Next button. Note: If this screen appears, insert the
Windows NT
® 4.0 CD-ROM into your CD-ROM
drive.
Turn on the printer power switch.
Select the Network interface
cable. Turn off the printer power switch.
Connect the network interface cable to
the printer, and then connect it to a free
port on your hub.
Click "Connect the interface cable &
Install the driver/utility."
Follow the instructions on the screen. Select "Network Shared Printer" or "Brother Peer-to-Peer
Network Printer," and then click the Next button.
Go to Step 6. * 1
Hub
Click the Install button.
For HL-1850 users: If you are going to connect the printer to your network, purchase the optional
Network board (NC-4100h).
Before you continue, please ensure that the administrator has configured the network printer
settings correctly referring to the Network Quick Setup Guide.
Follow the instructions in this guide for your network type and operating system.
Some illustrations are based on the HL-1870N.
Driver Installation Guide
Windows ® For Network Users
1
4
7
1 2
8
5 6
2 3
1
1
1
5
1
1 2 3 4
2 3 4 5
6 7 8
2 3 4
2 3
2 3 4