Brother DCP 9040CN - Manual (Page 9)

Setting Up the Machine
7
4 Install the power cord
1
Make sure that the machine’s power switch is
off. Remove the label covering the AC power
inlet.
2
Connect the AC power cord to the machine.
3
Plug the AC power cord into an AC outlet. Turn
the power switch on.
5 Selecting your language
(Canada only)
1
Press Menu.
2
Press 1.
3
Press 0.
4
Select your language (English or Français)
by using
or , and then press
OK.
5
Press Stop/Exit.
6 Setting the LCD contrast
You can change the contrast to help the LCD look
lighter or darker.
1
Press Menu.
2
Press 1.
3
Press 6.
4
Press to increase the contrast.
—OR—
Press
to decrease the contrast.
Press OK.
5
Press Stop/Exit.