Brother QL-550 - Manual (Page 17)

13
z
GETT
ING
S
T
ART
ED
Installing the DK Roll
There is a wide range of DK Rolls available for use with your QL-500/550, allowing you to create
almost any type of label you need.
Available supplies
The types of DK Rolls that may be used with the QL-500/550 are listed below.
Installing the DK Roll
1
Press the ON/OFF button to turn the QL-500/550 off.
Hold the DK Roll compartment cover at the sides near
the front of the QL-500/550 and firmly lift up to open the
cover.
2
Place the spool into the spool guides in the DK Roll
compartment.
Installing the DK Roll
DK Die-cut Paper Labels A roll of pre-cut paper labels.
DK Die-cut Film Labels A roll of pre-cut film labels that durable in water.
DK Durable Paper Tape A roll of continuous paper tape for printing labels
of varied length.
DK Durable Film Tape A roll of continous film tape for printing labels of
varied length that durable in water.
• Refer to Accessories on page 67 for a complete list of DK Rolls available.
• To obtain optimum performance, use only genuine Brother accessories and DK Rolls.
• Make sure that the spool arms are inserted firmly in the
spool guides on the left and right.
• Insert the spool with the DK Roll located on the right hand
side of the QL 500/550.