Brother IntelliFax-2820 - Manual (Page 12)

Using the machine as a printer
1 - 9
1
Duplex
The printer driver supports manual duplex printing.
Manual Duplex
The machine prints all the even-numbered pages on one side
of the paper first. Then, the Windows
® printer driver instructs
you (with a pop-up message) to reinsert the paper. Before
reinserting the paper, straighten it well, or you may get a
paper jam. Very thin or very thick paper is not recommended.
Check the Manual Duplex box. In this mode, the machine
prints all the even numbered pages first. Then the printer
driver stops and shows the instructions required to re-install
the paper. When you click OK the odd numbered pages are
printed.
Duplex Type
There are six types of duplex directions available for each orientation.
Flip on Left Edge
Flip on Right Edge
Flip on Top Edge
Flip on Bottom Edge
Flip on Top Edge (No Reverse)
Flip on Bottom Edge (No Reverse)
Binding Offset
Check the Binding Offset option, you can specify the offset value of the binding side in inches or millimeters
(0 - 8 inches) [0 - 203.2 mm].