Brother ULT2001 2001N 2001C 2002D 2003D User Manual
Page 308
Troubleshooting
9-11
7.
This message is dis-
played when the
embroidery unit is
attached, and the
“Reverse/Reinforcement
Stitch” button is
pressed.
8.
This message is
displayed when the
embroidery unit is
attached, and
or
is pressed.
9.
This message is dis-
played when you try to
combine more than 71
patterns.
10.
This message is dis-
played when
or
is pressed while
the machine is in utility
stitch mode.
11.
This message is dis-
played when the
patterns you are editing
take up too much
memory, or if you are
editing too many
patterns for the memory.
12.
This message is dis-
played when the “Start/
Stop” button is pushed
while the foot controller
is installed.
13.
This message is dis-
played when the “Start/
Stop” button is pushed
while the machine is in
embroidery edit mode
and a pattern is being
edited.
14.
This message is dis-
played when a key on
the LCD display is
touched while the
needle is in the down
position.
15.
This message is dis-
played when the
buttonhole lever is
down, a stitch other
than a buttonhole is
selected, and the “Start/
Stop” button or the
“Reverse/Reinforcement
Stitch” button is pushed.
16.
This message is dis-
played when the
embroidery unit is
attached and the power
is turned on with the
needle in the down
position.