Caller id – AltiGen comm AltiTouch 500 User Manual
Page 29
AltiTouch 500 Manual
19
6.
When the desired character is displayed, you can enter the next
character.
7.
If you have to use the same button to enter the next character, press the
$ button to move the cursor to the next position and enter the next
character.
8.
If you will use a different button to enter the next character, simply
press that button. The cursor will move to the next position
automatically.
9.
To insert a space, press the $ button to move the cursor to the right.
10. To re-enter a character, press the " button or the $ button to move
the cursor to the character you wish to modify.
11. After entering all characters, press the Save button to save this
number/name to the memory button.
Caller ID
Caller ID Service
The “caller identification” service (Caller ID) allows the caller's phone
number and/or name to be shown on the display as the call comes in before
you pick up the phone. Before using this feature, please make sure you have
properly entered your area code as explained in the “Programming Your
Area Code” step of the Installation section of this manual (“Program your
area code” on page 6).
Important:
When a new call comes in, you must let your phone ring at
least 2 full times in order for the Caller ID information to be
displayed.
Caller ID Display
When you receive a call, the phone number
appears on the display with the day and time
the call was received and is then stored in
the Call Memory as shown.
If your Caller ID service includes the
caller's name, then the caller's name also
appears on the display (up to 15 letters) as
shown.