Brother DCP-9045CDN - Manual (Page 93)

Troubleshooting and routine maintenance
79
C
White lines or ribbing down the
page on duplex print
Note
Position B is only for duplex
printing with recycled paper
when the temperature and
humidity are low.
„ Choose Thin Paper mode in the printer driver and re-send the print
job.
If the problem is not solved after printing a few pages, follow these
steps:
a
Open the back cover.
b
Pull down the two gray levers, one on the left-hand side and one
on the right-hand side, to position B as shown in the illustration
below.
c
Close the back cover.
d
Choose Plain Paper mode in the printer driver and re-send the
print job.
e
If the problem is not solved after printing a few pages, choose
Thin Paper mode in the printer driver and re-send the print job.
Note
When you have finished printing, open the back cover and reset the
two gray levers back to the original position.
„ Use thicker paper than you are now using.
Examples of poor print
quality Recommendation
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.