Brother QL-1060N - Manual (Page 14)

STEP1 Getting started 8
„ Front „ Rear
1
Press and hold the ON/OFF button to turn
the QL-1060N off. Pull up the left and right
levers on the machine under the top cover,
and open the cover.
2
Put the spool into the spool guides in the DK
Roll compartment.
•
Make sure that the spool arms are inserted firmly in
the spool guides on the left and right.
• Insert the spool with the DK Roll located on the right
hand side of the QL-1060N.
2 Parts Description
Main Printing Unit
FEED button
LED lamp
ON/OFF button
CUT button
DK Roll compartment cover
Power cord
USB port
LAN port
Serial port
3 Setting the DK Roll