Brother DCP-350C - Manual (Page 23)

General Information
9
1
Status LED indications
1
The Status LED (light emitting diode) is a light
that shows the status of the machine, as
shown in the table.
Printing Reports
1
The following reports are available:
„
Help List
A help list about how to quickly program
your machine.
„
User Settings
Lists your settings.
„
Network Config
(DCP-560CN only)
Lists your Network settings.
How to print a report
1
a
Press Menu.
b
Press a or b to choose
Print Reports
.
Press OK.
c
Press a or b to choose the report you
want.
Press OK.
d
Press Black Start.
e
Press Stop/Exit.
LED DCP status Description
Off
Ready The DCP is ready for
use.
Red
Cover open The cover is open. Close
the cover. (See Error
messages on page 69.)
Ink empty Replace the Ink
cartridge with a new one.
(See Replacing the ink
cartridges on page 74.)
Paper error Put paper in the tray or
clear the paper jam.
Check the LCD
message. (See Error
messages on page 69.)
Other
messages Check the LCD
message. (See Error
messages on page 69.)
20:48
COPY
Quality
Enlarge/Reduce
Paper Type
Paper Size
Brightness
Normal
100%
Plain
Letter
0
01