Brother DZ820E - Manual (Page 5)

3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Engl
ish
d
Safely remove the USB media from the USB
port on the computer.
a USB port on the computer
b USB media
CAUTION
e
Insert the USB media into the USB port on the
machine.
a USB port
(for a USB flash drive (USB flash memory))
b USB media
f
Press .
X The saved patterns are displayed.
Note
z If the message “Reduce the number of pat-
terns.” appears, the USB media may contain
either more than 200 embroidery patterns or
the embroidery designs may contain too
many colors (although there may be no
more than 200 patterns).
In this case, unplug the USB media from the
machine, plug it back into the computer,
and then delete a few designs at a time from
the USB media.
Close the error message on the machine,
and then repeat procedures starting from
step
e
.
Memo
z The pattern file names appear in alphabeti-
cal order.
z Only the names of .dst files are displayed.
g
Select the pattern you wish to retrieve.
Switch screens using
(Previous page key)
and (Next page key).
a Number of the currently displayed page from the
total number of pages
•When / is pressed, the display of
patterns moves forward or backward in
increments of 10 designs.
X The selected pattern is shown in reverse
highlighting.
● Before disconnecting the USB media,
click the “Unplug or Eject Hardware”
icon in the taskbar of Windows
®
2000 or
the “Safely Remove Hardware” icon in
the taskbar of Windows
®
XP/Windows
Vista
®
.
Then, when the removable disk can safely
be removed, disconnect the USB media
from the computer.
Windows
®
XP
Windows Vista
®
a