ALESIS PEQ-450 - Manual (Page 28)

basics of equalization • chapter 3
28 PEQ-450 Reference Manual
Description of Controls
There are five groups of knobs in vertical rows on each channel of
the PEQ-450. These are labeled BAND 1 through BAND 5. Their
function is as follows:
Gain
The GAIN
G
knob specifies the amount of boost or cut for that band.
The range of the control is –18dB to +18dB. When the Gain is set to
0dB, that band will not affect the audio. The only exception to this is
if the
LPF or HPF functions are on. These functions supercede the gain
setting on Band 1 and Band 5.
Frequency
0dB
+3dB
+6dB
+9dB
+12dB
-12dB
-9dB
-6dB
-3dB
Gain
Q
40Hz 200Hz 1kHz 10kHz 20kHz
Frequency
The FREQUENCY
F
knob controls the frequency that will be effected
by that band. The range is 20Hz to 20kHz for each band. You can set
several bands to the same frequency, if you like.
40Hz 200Hz 1kHz 10kHz 20kHz
The Diagram above shows the effect of sweeping the frequency
control up and down.