Audiovox DKP102 - Manual (Page 7)

5
Main Features
Front Panel Controls
1. Power Indicator– Bright red when power is on.
2. Power Button – To turn the DKP102 on or off.
3. Source Button – Press this button to select from the four available sources DVD, TV , AV, Radio.
4. Auto Pro. Button – When this button is pressed, all TV channels are searched and channels that are
detected with signals of sufficient levels are automatically stored in memory.
5. LCD Display Window – The LCD display shows the current time, source selected and radio
station.
6. Record Button – Press this button to record up to a 2 minute message.
7. Play Button – Press this button to playback the recorded message.
8. Numeric Buttons (1-5) – Used to recall the radio presets.
9. Mic – Microphone used for message recording .
10. Message Indicator – Flashes to indicate a message is waiting.
11. Timer Button – Used to set the timer function and turn off the timer buzzer when activated.
12. Clock Mode Button – Used to select the clock or alarm item to be set.
13. Store Button – Used to set the AM/FM presets into memory.
14. Radio Tune/Clock Set
– In Standby mode these buttons are used for setting hours, minutes, and to select
from 12 and 24 hour mode.
– In operation mode these buttons are used for radio tuning Up and Down.
15. Radio Band / Alarm Off Button – Radio Band selector. (Between FM1, FM2 and AM) Press this
button to turn off the alarm when activated.
16. Open Button – Used to unlock the shuttle housing.
17. Bass Boost Button – Used to increase the low frequency (Bass) response.
18. Volume Up/Down Button – Used to increase and decrease the volume level.
19. Channel Up/Down Button – Used to go to the next channel Up or Down.
20. Sensor Cover – Allows the remote control to operate the DKP102 and the installed shuttle
(DT102, DT85, DT7).
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 17 18 19 20
POWER SOURCE AUTO PRO. PLAY REC
MESSAGE
MESSAGE
RADIO TUNE
CLOCK SET CHANNEL VOLUME OPEN STORE TIMER MIC RADIO BAND/AlARM OFF CLOCK MODE BASS BOOST
TV