Asus CUV4X-DLS - Manual (Page 18)

18 ASUS CUV4X-DLS User’s Manual
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
Motherboard Frequency Settings (DIP Switches)
The motherboard frequency is adjusted through the DIP switches. The white block
represents the switch’s position. The illustration below shows all the switches in the
OFF position.
CUV4X-DLS DIP Switches
ON
1 2 3 4 5 6 7 8 OFF
ON
< F
requency Multiple
< Frequency Multiple < Frequency Multiple < Frequency Multiple < Frequency Selection < Frequency Selection < Frequency Selection < Frequency Selection
®
CUV4X-DLS
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
Setting JEN
Enable (JumperFree) [2-3] (default)
Disable (Jumper) [1-2]
®
CUV4X-DLS
CUV4X-DLS JumperFree™ Mode Setting
Jumper Mode JumperFree Mode
(Default)
JEN
ON
1 2 3 4 5 6 7 8
OFF
DIP_SW
2 3 1 2
NOTE: In JumperFree™ mode, set all DIP switches (DIP_SW) to OFF.