Axis Communications 200+ - Manual (Page 3)

UNIX
Type the following commands:
Example:
arp -s 192.168.3.191 00:40:8c:10:00:86 temp
ping 192.168.3.191
6. Access the AXIS 200+ by entering its Internet address (URL) into
the location field of your Web browser.
Example:
http://192.168.3.191/
7. The AXIS 200+ is delivered in approximate focus position, with
focus set to infinity. If you need to fine adjust to close focus,
carefully turn the smaller lens. If you cannot obtain a sharp
picture, loosen the lock ring and bring the camera into focus by
turning the larger lens.
Tighten the lock ring afterwards. Reload
your Web browser to test your adjustments.
The installation is complete and you can now include snapshots
taken by the camera into your own applications.
Taking Snapshots
To trigger a camera snapshot, simply enter the URL of your camera
into the location field of your Web browser.
These snapshot types are available within the AXIS 200+:
arp -s <Internet address> <Ethernet address> temp
ping <Internet address>
File name Size
(pixels)
Description
fullsize.jpg 352 x 288
30 kbytes
Full size JPEG snapshot. Generation
time = 0.5 sec
halfsize.jpg 176 x 144
15 kbytes
Half size JPEG snapshot. Generation
time = 0.3 sec
lastshot.jpg 352 x 288
or
176 x 144
The last snapshot taken by the
camera, either “full size” or “half
size”.
hugesize.jpg 704 x 576 The highest resolution snapshot
available. As opposed to the ‘fullsize’
and ‘halfsize’ images, this type of
snapshot is software generated.
Generation time = 18 sec
zoom.jpg 352 x 288 Derived from the from the center of
‘hugesize’. Generation time = 8 sec