Actiontec electronic HWE05490-01 - Manual (Page 10)

8 Actiontec 54 Mbps Wireless Ethernet Adapter User Manual
Connecting the Adapter to a network
Now that your Actiontec 54 Mbps Wireless Ethernet Adapter has been installed,
it is ready to be connected to the power outlet and to your wired network.
1. Get the Wireless Ethernet Adapter from your Quick Start Kit. Make
sure that the external antenna is connected to the adapter.
2. Get the Yellow Cable from the Quick Start Kit. Plug one end into
the Ethernet Port located on the back of the Ethernet Adapter. You
will hear a “click” when the Yellow Cable has been properly
connected.