AT&T PLUG&SHARETM 6800B4X - Manual (Page 10)

Setup Wizard
AT&T Plug&Share ™ 22 Mbps Turbo Wireless Router 6800B4X 10
Set Wireless LAN Connection
This screen displays the default settings for your wireless network.
Basic > Advanced > Admin > Status > Shortcuts > Help
SSID (Service Set Identifier): This feature pro-
vides protection against unauthorized access to
your network. The default SSID is at&t. You
should change this name to any alphanumeric
(numbers and/or letters) identifier up to 32 char-
acters long. All wireless adapters on your net-
work must use the same SSID as your wireless
router and/or access point. The SSID is case
sensitive (i.e., “cat” and “Cat” are not the same).
Channel: Click to choose any channel from 1 to
11. (Default is 6.) All wireless devices on the
network must be set to the same channel.
Click Next to display the Setup Completed screen.
Setup completed
Click Run Security Wizard to provide privacy
for your wireless network and help protect
against unauthorized access (see next page).
Click Back if you want to change any
settings.
Click Save Settings to end the setup session
now. (See Close Wizard description, page 12.)
Connection problems?
If there is no response when you click your web browser’s Home button, try the following:
• Reboot your computer.
• Turn off or unplug your modem for a few seconds, then turn it back on.
• If you still have no Internet access, please turn to the Troubleshooting section (page 68).
If you click on Run Security Wizard the Set Admin Password screen appears (see next page).
Wizard
Wireless
ISP Connection
DHCP
CAUTION: SSID and Channel number must be identical in all wireless network devices.