Ashly SRA-120 - Manual (Page 12)

Operating Manual - SRA-120 Power Amplifier
12
12. SPECIFICATIONS
12.1 Output Power:
Maximum Average Power, 0.1% THD, 1KHz
RMS Watts Per Channel, Both Channels Driven
8 ohms: 40W
4 ohms: 60W
Bridged Mono Mode:
8 ohms: 120W
FTC Continuous Power, 0.1% THD, 20Hz-20KHz
RMS Watts Per Channel, Both Channels Driven
8 ohms: 40W
4 ohms: 55W
12.2 Frequency Response:
±
0.2dB 20Hz - 20KHz
12.3 Total Harmonic Distortion (35W/ch.):
.01% 1ΚΗ
z
,
8
Ω
.05% 20Hz-20KHz 8
Ω
12.4 IM Distortion (35W/ch.):
(SMPTE): .01% 8
Ω
12.5 Output Hum And Noise:
(dB below full output 20Hz - 20KHz, unweighted)
>100dB
12.6 Damping Factor:
>200 into 8
Ω
, <1KHz
12.7 Full Power Input Sensitivity:
switchable .775Vrms/.245Vrms
12.8 Voltage Gain:
switchable 26.0dB/36.0dB
12.9 Input Impedance:
20K
W balanced
12.10 Bandwidth:
100KHz
12.11 Slew Rate:
20V/
µ
S
12.12 Rise Time:
2
µ
S 10%-90%
12.13 Power Requirements:
110-125VAC, 50-60Hz (240V Available)
12.14 Shipping Weight:
20 lbs.
Specification conditions are 120VAC 60Hz at 25°C.
13. WARRANTY POLICY
We thank you for your expression of confidence
in Ashly products. The unit you have just purchased is
protected by a limited five year warranty. To establish
the warranty, you must first complete and mail the war-
ranty card attached to your product.
Fill out the information below for your records.
Model Number _________________________________
Serial Number _________________________________
Dealer ________________________________________
Date of Purchase _______________________________
Dealer’s Address _______________________________
_______________________________________________
_______________________________________________
Dealer’s Phone _________________________________
Salesperson ____________________________________
OTHER INFORMATION:
_______________________________________________
_______________________________________________
_______________________________________________