System configuration example, Configuration example 1, Configuration example 2 – Canon VB-M600D User Manual
Page 18: System configuration example -6, Configuration example 1 -6, Configuration example 2 -6
1
-6
This software records images from cameras using an IP network, such as a LAN.
Configuration Example 1
This example shows the simplest system configuration, where the Storage Server and Viewer are installed on one computer.
Up to four cameras are connected and images from the cameras are displayed or recorded using the same computer.
Configuration Example 2
You can install a Storage Server and a Viewer separately in two computers on the network.
Note
RM-Lite operates with one Storage Server Group that contains one Storage Server.
System Configuration Example
Important
• The load on the Storage Server may increase depending on the number of cameras connected and the recording settings. See
“Determining the Capacity of the Storage Server” (P. 1-7) to consider your configuration.
• Regularly check that the time setting is correct on the computers that are running the Storage Server and the Viewer. Also, before
changing the time setting on the computers, be sure to first stop the Storage Server and Viewer.
Storage Server/Viewer
Image from camera
Storage Server Group
Viewer
Network
Images from the cameras
Recorded images