Canon PIXMA iX6850 User Manual
Page 260
The Message Is Displayed on the Computer Screen During Setup
The Enter Password Screen Is Displayed During Setup
"You are connecting the printer to the non encrypted wireless network" Is Displayed
The Enter Password Screen Is Displayed During Setup
The following screen is displayed if an administrator password is set to the printer which has already been
set up.
Enter the administrator password you have set.
Changing the Settings in the Admin Password Sheet
The Screen for Setting the Encryption Is Displayed After Selecting the
Access Point in the Access Points Screen
This screen is displayed automatically if the selected access point is encrypted. In this case, configure the
details to use the same encryption settings set to the access point.
For information on the encryption settings, see
Changing the Settings in the Wireless LAN Sheet
.
"You are connecting the printer to the non encrypted wireless network" Is
Displayed
Security is not configured on the access point. The printer can still be used, so continue the setup
procedure to complete it.
Important
• If you connect to a network that is not protected with security measures, there is a risk of disclosing
data such as your personal information to a third party.
260