Canon SELPHY CP810 - Manual (Page 29)

29
Commercially available USB cable
Connect SELPHY to the computer.
O Use the USB cable to connect SELPHY to the computer.
O Refer to the user guides included with the cable and
computer for handling instructions.
Turn on SELPHY.
O Press the q button to turn on SELPHY.
Windows
O When the installation finishes, click [Restart] to restart
the computer and complete the installation.
Confirm that the software has been started
properly.
X The software will start and the screen on the left will
appear when communication between SELPHY and the
computer is established.
O Perform Steps 2 to 4 to automatically start the software
the next time.
Windows
O If the screen in Step 5 does not appear, open it from the [Start] menu r [All Programs] r
[Canon Utilities] r [SELPHY Photo Print] r [SELPHY Photo Print].
Macintosh
O If the screen in Step 5 does not appear, follow the procedure below to register your printer.
Select [ ] from the menu, and click [System Preferences]
r [Print & Fax] to open the Print
& Fax screen. Click [+] to select [CP810] from the pop-up window, then click [Add].
After you have finished registering your printer, click the [SELPHY Photo Print] icon from the
Dock (the bar at the bottom of the desktop) to display the screen for Step 5.
O SELPHY may not operate correctly if it is connected to a computer via a USB hub.
O SELPHY may not function properly if other USB devices (with the exception of a USB mouse
or USB keyboard) are used at the same time. Disconnect any other USB devices from your
computer and then reconnect SELPHY.
O Do not put your computer into standby mode (or sleep mode) while SELPHY is connected to the
computer’s USB port. If you accidentally do so, awaken the computer from standby mode without
disconnecting the USB cable.
O For details on handling the computer, refer to the user guide included with your computer.
3
4
5