Canon PIXMA iP2850 - Manual (Page 169)

Printing Does Not Start
Check1 Make sure that the power plug is securely plugged in, then press the ON/
RESUME button to turn the printer on.
While the POWER lamp is flashing, the printer is initializing. Wait until the POWER lamp stops flashing and
remains lit.
Note
• When printing large data such as a photo or graphics, it may take longer to start printing. While the
POWER lamp is flashing, the computer is processing data and sending it to the printer. Wait until printing
starts.
Check2 Make sure that the USB cable is securely plugged in to the printer and the
computer.
When the printer is connected to your computer with a USB cable, check the followings:
• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the
computer, and try printing again. If printing starts normally, there is a problem with the relay device. Consult
the reseller of the relay device for details.
• There could also be a problem with the USB cable. Replace the USB cable and try printing again.
Check3 If there are any unnecessary print jobs, delete them.
Deleting the Undesired Print Job
Check4 Make sure that your printer's name is selected in the Print dialog.
The printer will not print properly if you are using a printer driver for a different printer.
Make sure that your printer's name is selected in Printer in the Print dialog.
Note
• To make the printer the one selected by default, select the printer for Default printer.
Check5 Restart your computer.
169