Canon Speedlite Transmitter ST-E3-RT - Manual (Page 29)

27
Flash exposure compensation and other settings set on the transmitter
(master unit) will also be automatically set in the flash (slave unit). You
do not need to operate the slave unit.
In the same way as normal exposure compensation, you can set
exposure compensation for flash. The flash exposure compensation
amount can be set up to ±3 stops in 1/3-stop increments.
1
Display <M>.
Press function button 4 to display <M>.
2
Press the <@> button.
Press function button 2 <@>.
X <f> is displayed and the flash
exposure compensation amount is
highlighted.
3
Set the flash exposure
compensation amount.
Turn <9> to set the flash exposure
compensation amount, and press <8>.
X The flash exposure compensation
amount is set.
“0.3” indicates 1/3 stops and “0.7”
indicates 2/3 stops.
To cancel flash exposure compensation,
return the compensation amount to “±0”.
Using Fully Automatic Wireless Flash
f Flash Exposure Compensation
Generally, set an increased exposure compensation for bright subjects
and set a decreased exposure compensation for dark subjects.
If the camera’s exposure compensation is set to 1/2-stop increments, flash
exposure compensation will be up to ±3 stops in 1/2-stop increments.
When the flash exposure compensation is set on both the transmitter and
the camera, the transmitter setting is given priority.
The flash exposure compensation amount can be set directly with <9>
without pressing the button (C.Fn-13/p.57).
COP
Y