Making two-color copies – Canon PC170 User Manual

Page 40

Advertising
background image

Operating Procedure

38

2

V

arious W

ays to Copy

Holding the platen cover in the open
position with your left hand, slide the top
right corner forward with your right hand.
Repeat for the opposite corner, and lift the
platen cover away.

Position the original on the platen glass

and press the

key.

(See “Normal Copying” on p. 30.)

Align the tabs on the under-side of the
platen cover with the grooves on the main
unit. Slide the platen cover into place.
Then, insert the securing tabs on the
platen cover into the holes on the copier
unit.

REQUEST:

Do not press down on the original with
excessive force while on the platen glass.

The maximum allowed weight that can be
placed onto the platen glass is 4.4lb.

When you are finished copying, be sure to re-
attach and close the platen cover.

NOTICE:

Place the original on the platen glass so that it
does not cover, or come in contact with, the rail
at the front of the platen glass.

Making Two-color
Copies

Simply by changing the color of
the cartridges, you can make
colorful copies. The following
procedure describes the process
for making a black and blue two-
color copy.

Select the originals to be used for the
two-color copy. In this case, one original
will be used for copying in black and the
other in blue. After making two copies of
the originals, white out unnecessary parts
on each using correction liquid, poster
paint or tape.

02/ PC150-USA

5/11/04, 4:55 PM

38

Advertising