Canon Wireless File Transmitter WFT-E4 II A - Manual (Page 43)

43
Batch Transfer
1 In [WFT settings], select [Image sel./
transfer].
2 Select [All image].
3 Select [Card images not transferred].
To transfer images that could not previously be
transferred, select [Card images failed transfer].
4 Transfer the images.
Select [Transfer].
Select [OK] on the confirmation screen displayed
next.
X A transfer progress screen is displayed.
During image transfer, the <LAN> lamp blinks.
Batch Transfer of Images on CF Cards
Selecting [Clear card’s transf. history] will set the transfer history of images on the CF card to
“unsent.” This enables you to resend all the images on the card later by selecting [Card images not
transferred].
COP
Y