Canon imagePROGRAF iPF9400S - Manual (Page 564)

• If no print job was received
1.
Press the Load button.
2.
Press ▲ or ▼ to select Load Cut Sheet, and then press the OK button.
Note
• If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select "Yes", and then press the OK button. Remove the paper and go to the next step.
2
Lift the Release Lever and open the Top Cover.
Important
• Do not touch the Linear Scale (a), Carriage Shaft (b), or
Fixed Blade (c). This may stain your hands and damage
the printer.
Loading Sheets in the Printer iPF9400S
User's Guide
Handling and Use of Paper
Handling sheets
564