Canon imagePROGRAF iPF6400 - Manual (Page 36)

Acquiring Color Measurement Data For Any Color Chart
36
7
Configure the color measurement settings and drying settings, and then click Next.
Setting Item Details
Color Measurement
Preferences Configures the pattern size to print the color charts and the drying settings
for the printed color charts.
Choose Standard to print at the standard pattern size and dry using the
standard setting values.
Click the Settings button to display the Color Measurement Preferences
dialog box, which allows you to configure the pattern size and drying
method in detail.(
*1 )
Reduce Drying Time Selecting this check box reduces the drying time.
Once the time configured in the Color Measurement Env. sheet in the
Preferences dialog box has elapsed, color measurement proceeds without
performing any further drying with the ventilation fan.
Specify a time that offers sufficient drying by air drying in the Preferences
dialog box. If you perform color measurement while the ink is not dry, the
measurements may not be correct.
The Preferences dialog box is displayed when you click Preferences in the
File menu.
If the number of patterns is small, drying will finish in a shorter amount of
time than the time configured in the Preferences dialog box. If this happens,
the drying time will not be reduced even if the Reduce Drying Time check
box is selected.
Illumination Select the illumination from D50, D65, and A.