Canon imagePROGRAF iPF825 - Manual (Page 16)

16
Loading Rolls in the Printer
Do not detach the Roll Unit in the following cases. •
See the following procedure for instructions on attaching the Roll Holder to the roll. •
Be careful not to pinch your fi ngers between the Roll Holder shaft (a) and the guide grooves (b) when
loading rolls. •
(→ , Attaching the Roll Holder to Rolls)
During printing •
Vibration from removing the Roll Unit may affect the printing quality.
If a sheet is loaded in the printer
•
The sheet may be ejected, and (rarely) it may be bent.
1
3
2
Load a roll in the Roll 2 (Lower) position (iPF825 only)
Confi rm that a roll is selected as the paper source.
(→"Selecting the Paper Source," User Manual)
Holding the Roll Holder so that the side with the white
gear faces the side of the Roll Holder Slot with a white
gear, load the Roll Holder shaft (a) into the grooves (b)
on both ends of the Roll Holder Slot .
Holding the Roll Unit Lever (a), pull out the Roll Unit .
OK
a
a b a b