Canon imageCLASS MF4890dw - Manual (Page 20)

20
Placing Documents on the Platen Glass
1
Open the feeder.
2
Place your document face down.
3
Align the document with the appropriate paper size marks.
•
If the document does not match any of the paper size marks, align the upper left
edge of your document with the arrow mark.
•
If the document is a transparency, place white paper above the document.
A5
STMT
B5
A4
LTR
4
Close the feeder.
Placing Documents in the Feeder
1
Open the document feeder tray.
2
Spread the document guides a little wider than the document’s width.
When placing large documents, pull out the extension tray.
3
Fan the document stack and align the edges of the pages.
Thoroughly fan the
paper in small batches.
Align the edges a few
times on a fl at surface.
CAUTION
•
When closing the
feeder, be careful not
to get your fi ngers
caught.
•
Do not press down
on the feeder
forcefully. This may
damage the platen
glass and cause
personal injury.