Configuring ftp communication settings, Cop y – Canon Wireless File Transmitter WFT-E2 II A User Manual

Page 30

Advertising
background image

30

These instructions are continued from Chapter 1.

1

Turn the <5> dial to select [Address setting],
and then press <0>.

2

If you have set the DNS server setting to
[Disable], the screen at left is displayed.

Press <0> to select the input position, and then
turn the <5> dial to enter the IP address of the
FTP server.

If you have set the DNS server IP address setting
to [Auto assign] or [Manual setting], the screen
at left is displayed.

For instructions on screen operations, refer to
“Virtual Keyboard Operation” (p.27).

Enter the FTP server’s server name or IP address.

3

In [Port number setting], enter 00021, in most
cases.

Turn the <5> dial to select [OK], and then press
<0> to go to the next screen.

4

Complete the [Passive mode] settings.

If an Error 41 (“Cannot connect to FTP server”) is
displayed in step 8, setting [Passive mode] to
[Enable] may resolve it.

5

Complete the [Proxy server] settings.

Turn the <5> dial to select [OK], and then press
<0> to go to the next screen.

Configuring FTP Communication Settings

COP

Y

Advertising