Cleaning the machine, Cleaning the exterior, Cleaning the fixing unit – Canon imageCLASS D1350 User Manual

Page 124

Advertising
background image

8-2

M

ain
tenanc

e

Cleaning the Exterior

Clean the exterior of the machine and ventilation slots.

1

Turn OFF the power switch and disconnect the

power cord.

2

Clean the exterior of the machine with a soft, well

wrung out cloth dampened with water or mild

detergent diluted with water.

3

Wait for the machine to dry completely before

reconnecting the power cord, and then turn ON

the power.

Cleaning the Fixing Unit

The fixing unit may be dirty under the following conditions. In

such case, clean the fixing unit.

• When black streaks appear on the output
• When the toner cartridge is replaced

Keys to be used for this operation

OK

Menu

1

Press [

] (Menu).

2

Select <Adjustment/Maintenance> using [ ] or

[ ] and press [OK].

Menu
Scan Settings
USB Direct Print Se

...

Printer Settings

Adjustment/Maintenan

3

Select <Clean Fixing Unit> using [ ] or [ ] and

press [OK].

Adjustment/Maintenance
Toner Saver Mode
Black Text Processi

...

Special Processing

Clean Fixing Unit

4

Check if the supported paper is set in the paper

drawer and press [OK].

Supported Paper:
Size: A4, LTR
Type: Plain, Plain L

OK

5

Check the procedure shown in the display and

press [OK].

* The cleaning paper will be printed.

Steps (Stare:Press OK)
1. Print Clean. Sheet
2. Start Cleaning

6

Load the cleaning paper to the multi-purpose tray

with the black band side up.

7

Check the screen and press [OK].

The cleaning begins. It takes approximately 80 seconds to
complete the process.

Place the cleaning
sheet with the print
face up in the mulch-
purpose tray, and
press OK.

* We recommend that plain paper be loaded when cleaning the

fixing unit.

When the cleaning does not start

You cannot use this function when jobs are stored in memory.

8

Press [

] (Menu) to close the menu screen.

Cleaning the Machine

Advertising
This manual is related to the following products: