Specifying destinations, Specifying destinations by entering the fax number, Specifying destinations using one-touch keys – Canon imageCLASS D1350 User Manual

Page 90: Specifying destinations using coded dial codes, See p.6-4 t

Advertising
background image

6-4

U

sing
the
Fax

Func
tions

Specifying Destinations

Specifying Destinations

Specifying destinations by entering the fax number

Specifying destinations using one-touch keys

Specify the fax number using the numeric keys, [

] (Tone), and [

]

(SYMBOLS).

Press the one-touch key (01 to 19) in which the destination is registered.

To select a destination from the one-touch keys, you need to register

destinations in these keys in advance.

“Registering and Editing One-Touch Keys” (

→P. 5-3)

To modify destinations

• To cancel the entered destination

Press and hold [

] (Clear).

• To delete the last character of the entered

destination

Press [

] (Clear).

When the wrong key is pressed
(1) Press [

] (Clear).

(2) Select <Yes> using [ ] and press [OK].

* To clear all the scan settings specified, press [

]

(Reset).

Specifying destinations using coded dial codes

Press [

] (Coded Dial), and then enter the three-digit registration number

(001 to 181) with the numeric keys.

To select a destination from the coded dial codes, you need to register

destinations in these codes in advance.

“Registering and Editing Coded Dial Codes” (

→P. 5-6)

When the wrong key is pressed
(1) Press [

] (Clear).

(2) Select <Yes> using [ ] and press [OK].

* To clear all the scan settings specified, press [

]

(Reset).

Advertising
This manual is related to the following products: