Answer mode, Manual mode, Drpd (distinctive ring pattern detection) mode – Canon imageCLASS D1350 User Manual

Page 99

Advertising
background image

6-13

U

sing
the
Fax

Func
tions

Answer mode

You can receive faxes automatically.

The telephone’s built-in answer function records messages of unanswered calls.

The telephone rings the number of times specified for the built-in
answering machine.

*1

When you pick up the handset during

ringing

When the built-in answering machine

starts up

When the call is a fax

When the call is a

voice call

The built-in answering

machine records the

message.

*2

You can start talking as

is.

When the call is a

voice call

When the call is a fax

The machine receives the

fax automatically.

Operation for when an incoming call is received

You can hear a

beep.Following the

procedure below, receive the

fax.

(1) Press [Fax].

(2) Select <Start Receiving>

using [ ] or [ ] and

press [OK].

(3) Hang up the handset.

*

1

Set the answer function to answer after a few rings.

*

2

The message is recorded on the answer function (You are advised to add approximately 4 seconds of silence at the beginning

of the message or set the maximum recording time to 20 seconds).

Manual mode

Pick up the handset to answer calls or receive faxes when the machine is set to manual mode.

Set this mode when you expect to receive more incoming telephone calls than faxes or when you receive few faxes.

Operation for when an incoming call is received

The external phone rings.

When you pick up the handset while the
telephone rings

When the call is a fax

When the call is a voice call

When you do not pick up the handset while
the telephone rings

The machine cannot receive a call or fax.

*1

You can start talking as is.

You can hear a

beep.Following the

procedure below, receive the

fax.

*2

(1) Press [Fax].

(2) Select <Start Receiving>

using [ ] or [ ] and

press [OK].

(3) Hang up the handset.

*

1

When “Auto RX Switch” (

→P. 6-25) is set to <On> , the machine automatically starts receiving a fax after several rings.

*

2

When “Remote RX” (

→P. 6-25) is set, you can dial the telephone to receive faxes remotely.

DRPD (Distinctive Ring Pattern Detection) mode

This mode assigns distinctive ring patterns to up to two phone numbers per telephone line. The machine automatically

identifies incoming calls based on the ring pattern and sorts out whether an incoming call is a fax or voice call. Set the fax ring

pattern that matches the ring pattern of your telephone company. Contact your telephone company for more information.

Advertising
This manual is related to the following products: