American DJ DCD-PRO450 - Manual (Page 9)

CONTROLS AND FUNCTIONS (REAR)
American DJ
®
AUDIO • DCD-PRO450™ INSTRUCTIONS MANUAL • PAGE 9
52 52
53
53
D. CONTROL UNIT REAR PANEL (Figure 6)
52. CONNECT TO MAIN UNIT - Connect supplied 8-pin
cable from REMOTE 1 on MAIN UNIT (50) to REMOTE
1 on CONTROL UNIT.
Fig. 6
50
48
49
51
47
Fig. 5
C. MAIN UNIT REAR PANEL (Figure 5)
47. DIGITAL OUT - connect to Minidisc or CD-R device.
48. POWER CONNECTOR/FUSE - IEC Power Connector
with built-in fuse holder. Always replace with same type
fuse.
49. VOLTAGE SELECTOR - Select which voltage
desired: 115V or 230V. Always disconnect the power plug
before changing the voltage.
50. REMOTE 1 & 2 - Connect supplied 8-pin cable from
REMOTE 1 on MAIN UNIT to REMOTE 1 on CONTROL
UNIT (52).
51. AUDIO OUT 1 & 2 - Audio Out signals. Connect
RCA cable from AUDIO OUT to a mixer input.
53. CONTROL - Connect mini-plug from CONTROL out
on rear of CONTROL UNIT to a mixer’s CONTROL out.
This feature is available on all mixers with Fader “Q” Start
(see also “Q” Start Control p.5).