Canon imagePROGRAF iPF765 MFP M40 User Manual
Page 506
Setting Item
Description, Instructions
GL2 Set-
tings
Line &
Pen
Manager
Smoothing
•
If you choose Software
Operation is determined by the application. If nothing is
specified by the application, the result is as shown in the
figure.
Note: By default, this is a 72-sided figure
•
If you choose Smooth
ThickenFineLines
Select On to print fine lines more distinctly.
AdjustFaintLines
If fine lines are printed in colors that do not match the colors of
other shapes, selecting Off may help produce the expected re-
sults. However, lines in some colors may appear broken.
Proces-
singOp-
tion
Warning
Select On to have any GL2-related warnings displayed.
On-the-Fly
Selecting On will start printing jobs sooner if you are printing
only HP RTL print jobs and printing would not start until later.
However, images may be incomplete in some cases, so be
sure to check the printing results.
PageSizeProcess1
Normally, the area available for printing excludes a margin re-
quired by the printer, and images are positioned accordingly.
Selecting On in this setting eliminates any misalignment of the
printing position if the image itself includes a border.
PageSizeProcess2
Selecting On will determine the paper size based on the image
rendering area.
GL2 Set Print
Print GL2 settings information.
Interface
Setup
EOP Timer
Specify the timeout period before cancellation of print jobs that
cannot be received by the printer.
TCP/IP
IPv4
IPv4 Mode
Choose whether the printer IP address is configured automati-
cally or a static IP address is entered manually.
Protocol
DHCP
Specify the protocol used to configure the IP address automati-
cally.
BOOTP
RARP
IPv4 Set-
tings
IP Address
Specify the printer network information when using a static IP
address.
Subnet Mask
Menu Settings
iPF765
Control Panel
Printer Menu
506