Canon imageFORMULA DR-M140 Document Scanner - Manual (Page 30)

30
Placing Cards
1
Set the feed selection lever to the standard feeding
position (lower position).
2
Open the document feed tray.
3
Open the straight path tray.
CAUTION
Open the straight path tray when scanning cards. Scanning with
the U-turn path may damage the card.
4
Adjust the document guides to fit the width of the card to
be scanned.
5
Place the card.
Up to three non-embossed cards can be placed vertically or
horizontally at one time. Embossed cards must be placed one at
a time and vertically.
CAUTION
• Use the straight path when scanning cards.
• Embossed or laminated cards may not be scanned correctly,
depending on the card.
• Ultrasonic double feed detection will not function properly when
scanning cards. Clear the [Detect by Ultrasonic] check box in the
[Feeding] tab.
0-00-DR-M140_RG_UK.book Page 30 Monday, August 8, 2011 5:15 PM