Canon imageFORMULA DR-C125 Document Scanner User Manual

Page 60

Advertising
background image

60

Problem 8

Multiple pages of scanned images cannot be saved
to a single file.

Solutions

Depending on the file format, multiple scanned image
pages cannot be saved as a single file with
CaptureOnTouch Lite and CaptureOnTouch.

File type

Processing for multiple pages

BMP (Windows
only), JPEG

Scanned images are always saved one
page per file.

PPTX (Windows
only)

Multi-page images are always saved to a
single file.

TIFF, PDF

You can save multiple pages to a single
file by clicking

and selecting [Save all

pages as one file] in the displayed dialog
box.

Problem 9

All of the placed documents have been scanned, but
the scanned image does not appear on the
application.

Solutions

When [Panel-Feeding] or [Automatic Feeding] is
selected as the feeding method on the scanner driver’s
setting screen, a scanning operation will not continue
after all of the documents are fed, as the scanner awaits
additional documents to be fed. You can finish the
operation and send the scanned images to the
application by pressing the [STOP] button on the
operating panel.

Problem 10 Memory becomes insufficient and scanning stops.

Solutions

If you configure scanning conditions that use a large
amount of the computer's memory, scanning may stop
because of insufficient memory. Although this depends
on the computer's memory size, the possibility of
insufficient memory increases if any of the following
scanning conditions overlap.
• [Color Mode] is set to [24-bit Color]
• A large page size (e.g. Legal) is specified as the [Page

Size]. Alternatively, the page size is set to [Scanner's
Maximum].

• A high resolution (600dpi etc.) is specified for [Dots per

inch].

If an error message appears due to insufficient memory
while scanning is in progress, exit the application,
change the scanning conditions (e.g. reduce the
resolution or page size) and then try scanning again. In
addition, the amount of memory used can be contained
by turning off [Moire Reduction] and [Please change
prevent bleed through and remove] if they are set to on.

Problem 11 Scanned images are upside down.

Solutions

Confirm the scanner driver settings.
In Windows, confirm that the [Upside-down feeding]
check box in the [Feeding] tab is cleared.
In Mac OS X, confirm that the [Upside-down feeding]
check box in the [More] dialog box is cleared.

0-00-DR-C125_RG_UK.book Page 60 Thursday, September 8, 2011 6:03 PM

Advertising