Canon imageCLASS D1350 - Manual (Page 15)

15
2.
Select the fax receive mode.
The receive mode is set to <Auto>.
→ Proceed to Step 3.
• Receive faxes automatically.
• The telephone functions do not be used.*
* When the telephone is connected in the auto receive mode, the
telephone rings when receiving a fax or telephone call. You can
answer the telephone while it is ringing. To turn off the telephone
ringer, see “Incoming Ring” in the e-Manual.
Do you want to use
this machine for fax
only (no telephone)?
Yes
No
Do you want to auto-
receive faxes and
answer phone manually?
Yes
No
Do you want to use
an answering machine
to answer the phone?
Yes
No
The receive mode is set to <Fax/Tel Auto Switch>.
→ Proceed to Step 3.
• Receive faxes automatically.*
• Responds to a telephone call
by picking up the handset.
* The telephone rings on incoming calls. To turn off the telephone
ringer, see “Incoming Ring” in the e-Manual.
The receive mode is set to <Answer>.
→ Proceed to Step 3.
• Receive faxes automatically.
•
Respond to telephone calls using the built-in answer function.
• Ring on incoming calls or faxes.
The receive mode is set to <Manual>.
→ Proceed to Step 3.
• Respond to incoming calls or faxes by picking up the
handset.
• Ring on incoming calls or faxes.
You can specify how the machine should operate for a fax call or telephone call.
By answering the prompts that appear on the display, the machine will be set to one of the following four operation modes.
<Auto><Fax/Tel Auto Switch><Answer><Manual>
Yes
Yes
Yes
No
No
No
Preface
1
Installing the Machine
2
Configuring and Connecting the Fax
3
Connecting to a Computer and
Installing the Drivers
4
Appendix