Audiovox FR-240 User Manual
Page 12
To Receive.
1. Set the desired channel and CTCSS code.
2. Adjust the volume control to the desired listening volume by
using the up and down buttons while observing the volume
indicator on the display
3. The transceiver will play strong signals through its internal
speaker or through a headset if so equipped.
To Transmit
1. Set the desired channel.
2. Press and hold the P (Push-to-Talk) button while speaking slowly
and clearly in a normal voice, approximately 2 to 3 inches
from the microphone.
3. The transmit indicator will illuminate while transmitting.
4. Release the P (Push-to-Talk) button when you finish speaking
to receive incoming signals.
Monitor Function
The monitor button can be used to play all signals present on a
channel. This is useful when communicating with other parties at
extreme range.
The monitor function can be locked on by pressing its button for
three seconds. A confirmation tone indicates that the monitor
lock has been activated. Pressing either the call, P (Push-to-Talk)
or monitor buttons will unlock the monitor function.
-10-