Alpine DVA-9861 - Manual (Page 14)

12
-EN
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold for at least 2 seconds.
• The CD-player can play discs containing audio data, MP3 data and
WMA data.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If is pressed during M.I.X. DISC playback, new file will be played
back in a random sequence. If is pressed, the beginning of the
current file will be played back.
MP3/WMA Play Display
The folder number and file number will be displayed as described
below.
• Press TITLE to switch the display. Please see “Displaying the Text”
(page 23) for information about display switching.
• If the folder number or file number is three digits, F or T becomes
numbers of hundred rank.
Repeat Play
Press 4 to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4 again and select RPT to deactivate repeat play.
CD mode :
*
1
When a CD changer is connected
• If REPEAT is set to ON during M.I.X. (M.I.X. ONE) play in CD
changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode :
*
2
When an MP3 compatible CD changer is connected
• If a 6-disc CD changer or an MP3 compatible CD changer is
connected:
In CD changer mode, press FUNC. to illuminate the “
”
indicator, and go to the step above within 10 seconds.
• If a 12-disc CD changer is connected:
In CD changer mode, press FUNC. twice to illuminate the
“
” indicator, and go to the step above within 10 seconds.
M.I.X. (Random Play)
Press 5 in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5 again.
Internal CD mode :
CD Changer mode :
• If M.I.X. is set to ON during RPT (REPEAT ALL) play in CD
changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode :
* When an MP3 compatible CD changer is connected
• If a 6-disc CD changer or an MP3 compatible CD changer is
connected:
In CD changer mode, press FUNC. to illuminate the “
”
indicator, and go to the step above within 10 seconds.
• If a 12-disc CD changer is connected:
In CD changer mode, press FUNC. twice to illuminate the
“
” indicator, and go to the step above within 10 seconds.
F01 T03 10'15
Folder number
display File number
display Elapsed time
: Only a track is repeatedly played back
: A disc is repeatedly played back
: Only a file is repeatedly played back
: Only files in a folder are repeatedly played back
: A disc is repeatedly played back
: The tracks are played back in random
sequence.
: M.I.X. mode off
: The tracks are played back in random
sequence.
: The tracks on all the CDs in the current
magazine will be played back in the random
sequence.
: Only files in a folder are played back in
random sequence.
: The files are played back in random
sequence. If an MP3 compatible CD changer
is connected, all files in a disc are played
back in random sequence, and playback
shifts to the next disc.
: M.I.X. mode off