Electrolux EW30IC60LB - Manual (Page 10)

10 Setting Surface Controls
Using the GLIDE-2-SET TM zone
control
Method 1
Slide a fi nger in the Glide-2-Set TM
ring touch area.
Method 2
Directly touch any position in the
Glide-2-Set
TM ring touch area.
Method 3
Touch "-" and/or "+" pads for
precise power value setting. At
startup, pressing "-" will set the
control at Lo and pressing "+" will
set it at Power Boost.
Powering ON/OFF
Press the ON/OFF pad to activate
the Glide-2-Set
TM zone control.
Zone Control Power Levels
Over 25 power levels are available
with the Glide-2-Set
TM controls.
Here are the exact positions for
those precise settings.
Setting WARM
Press the WARM pad to keep
the cooking utensil at serving
temperature.
WARM
HI LO
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
The Glide-2-Set TM zone control is a new and
innovative way to set your cooking zone power. Heat
is controlled by just the touch of a fi nger, resulting in
a clean look uncluttered by knobs or dials.
Fig. 1
Fig. 4
Fig. 2
Fig. 5
Fig. 3
Fig. 6
These controls are intuitive, precise and very
stylish. Three methods of setting these controls are
available for a better ease of use.