Solutions to common problems, Drawer is not level, Cannot move appliance easily – Electrolux EW27WD55GS User Manual
Page 10: Warmer drawer does not operate
10
Solutions to Common Problems
DRAWER IS NOT LEVEL
• Poor installation. Place a level on the cutout bottom. Make sure bottom is
level.
• Be sure cutout bottom is strong and stable enough to adequately support
drawer (and wall oven, if applicable).
CANNOT MOVE APPLIANCE EASILY
• Appliance must be accessible for service.
• Cabinets not square or are built in too tightly. Contact builder or installer to
make appliance accessible.
WARMER DRAWER DOES NOT OPERATE
• Make sure cord/plug is plugged tightly into outlet.
• Service wiring is not complete. Contact your dealer, installing agent or
authorized servicer.
• Power outage. Check house lights to be sure. Call your local electric
company for service.
IMPORTANT
Before calling for service, review this list. It may save you both time and expense. This list
includes common experiences that are not the result of defective workmanship or material
in your Warm & Serve Drawer.